Pioneer SC-LX904 11.2 Channel AV Receiver Owners Manual-English - Page 187
Surround Right, Surr Back Right
View all Pioneer SC-LX904 11.2 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Surround Right Default Value 0.0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" (in 0.5 dB intervals) with / . To readjust the overall volume balance with "Trim", select "Trim" in / , and use / to adjust the volume. • If "OVER!" is displayed during adjustment, the volume of the frequency band or another frequency band is too high, so reduce the volume of the frequency bands until the display disappears. • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. Setting Item Surr Back Right Default Value 0.0 dB Setting Details After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-12.0 dB" and "+12.0 dB" (in 0.5 dB intervals) with / . To readjust the overall volume balance with "Trim", select "Trim" in / , and use / to adjust the volume. • If "OVER!" is displayed during adjustment, the volume of the frequency band or another frequency band is too high, so reduce the volume of the frequency bands until the display disappears. • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover". • If an item cannot be selected even though connection is correct, check that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. 187 Front Panel≫ Rear Panel≫ Remote≫