Ricoh Aficio SP C811DN Software Guide - Page 198

5. Making Printer Settings Using the Control Panel • Default: 802.11 Ad hoc • Transmission mode can also be set using a Web Image Monitor. For details, see Web Image Monitor Help. SSID Setting Specify the SSID in the infrastructure mode and the 802.11 Ad hoc modes. • Default: blank (ASSID) • Select [?] to enter [/] for the SSID. Also, [¥] appears when printing the configuration page, read it as [/]. • Characters used are ASCII 0x20-0x7e (32 bytes). • An SSID is set automatically to the nearest access point if no SSID has been set. 5 • If no SSID has been set for the 802.11 Ad hoc mode, an SSID is set automatically and the same SSID is used for the 802.11 Ad hoc mode and the infrastructure mode. • If blank is specified in SSID for 802.11b Ad hoc mode or Ad hoc mode, "ASSID" appears. • An SSID can also be set using Web Image Monitor. For details, see Web Image Monitor Help. Channel Select channels: 1-13 ( )/1-11 ( ). • Default: 11 ( and ) Security Type Select whether to enable or disable encryption. When encryption is enabled, specify the security type. • Off • WEP Hex:10/26,ASCII:5/13 Digits • WPA Encrypt Method (TKIP, CCMP(AES), Authentication Method (WPA-PSK, WPA(802.1x)) • Default: Off • The WEP key can be entered using a hexadecimal number or an ASCII character sequence. • The WPA-PSK can be entered using an ASCII character sequence. 196