Ricoh Aficio SP C811DN Software Guide - Page 229
access, View settings, IPv4 Configuration, IPv6 access mask Configuration
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Remote Maintenance by telnet access Use the "access" command to view and configure access control. You can also specify two or more access ranges. View settings msh> access IPv4 Configuration msh> access [×] range "start-address end-address" • [×] represents a target number between 1 and 5. (Up to five access ranges can be registered and selected.) Example: to specify accessible IPv4 addresses between 192.168.0.10 and 192.168.0.20: msh> access 1 range6 192.168.0.10 192.168.0.20 IPv6 Configuration msh> access [×] range6 "start-address end-address" • [×] represents a target number between 1 and 5. (Up to five access ranges can be registered and selected.) 6 Example: to specify accessible IPv6 addresses between 2001:DB8::100 and 2001:DB8::200. msh> access 1 range6 2001:DB8::100 2001:DB8::200 IPv6 access mask Configuration msh> access [×] mask6 "base-address prefixlen" • [×] represents a target number between 1 and 5. (Up to five access ranges can be registered and selected.) Example: to specify accessible IPv6 addresses to 2001:DB8::/32 msh> access 1 mask6 2001:DB8:: 32 Access control initialization msh> access flush • Use the "flush" command to restore the default settings so that all access ranges become "0.0.0.0" for IPv4, and ":: " for IPv6. • The access range restricts computers from use of the machine by IP address. If you do not need to restrict printing, make the setting "0.0.0.0" for IPv4, and "::" for IPv6. • Valid ranges must be from lower (start address) to higher (end address). • If you are running IPv4 or IPv6, up to five access ranges can be registered and selected. • IPv6 can register and select the range and the mask for each access ranges. • IPv6 mask ranges between 1 - 128 can be selected. 227