Ricoh Aficio SP C811DN Software Guide - Page 235
dns, You can register IPv4 DNS Server address.
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Remote Maintenance by telnet • The default is 300 seconds. Specifying the number of concurrent connections msh> diprint conn {multi | single} • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. • The default is "multi". Specifying the timeout and APL termination settings msh> diprint apl {async | cync} • Specifies whether or not to synchronize the timeout and APL termination. dns Use the "dns" command to configure or display DNS (Domain Name System) settings. View settings The following command displays current DNS settings: 6 msh> dns IPv4 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 • You can register IPv4 DNS Server address. • You can register up to three IPv4 DNS server numbers. • You cannot use "255.255.255.255" as the DNS server address. IPv6 DNS server configuration The following command enables or disables the IPv6 DNS server address: msh> dns "number" server6 "server address" • You can register IPv6 DNS Server address. • You can register up to three IPv6 DNS server numbers. Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". 233