Ricoh Aficio SP C811DN Software Guide - Page 290
An invalid scope ID was used. Use a valid scope, wpa authentication Failed
![]() |
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
6. Monitoring and Configuring the Printer Message Problem and solutions Started. The bonjour function is enabled. Terminated. The bonjour function is disabled. The print server received error dur- Login to the file server failed. The print server is not ing attempt to log in to the network. Access to the registered or a password is specified. Register the network was denied. Verify that the print server print server without specifying a password. name and password are correct. too many pictures. PictBridge printing failed because too many image are sent during one print transacation. Reduce images at one print transaction. trap account is unavailable. v3Trap cannot be sent. This could be because the Trap destination account is different from the account specified by the printer. 6 usbd is disable. Plug and Play function and printing is disabled because usbd is disabled in the security mode. Enable usbd in the security mode. WINS name registration: No response to server There was no response from the WINS server. Check the correct WINS server address is entered. Alternatively, check the WINS server is functioning properly. WINS wrong scopeID= An invalid scope ID was used. Use a valid scope ID. wpa authentication Failed WPA authentication failed. Check the WPA configuration. wpa authentication started WPA authentication has started. wpa IEEE802.1X started WPA authentication has started. wpa connecting to authenticator WPA is connecting to authenticator. wpa link up WPA key exchange has finished, and communication has been terminated. wpa probe response doesn't have IE. WPA probe response does not have IE. wpa success authenticated WPA authentication was successful. 288
![](/manual_guide/products/ricoh-aficio-sp-c811dn-software-guide-5d212b2/290.png)