Ricoh Aficio SP C811DN Software Guide - Page 251
sntp, server. The default is 60 minutes.
![]() |
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
Remote Maintenance by telnet If a number from 1-5 is entered, settings are displayed for that number only. Configuring a sending address for SNMP v3 TRAP msh> snmp v3trap {1-5} {ipv4|ipv6|ipx} "address" Configuring a sending protocol for SNMP v3 TRAP msh> snmp v3trap {1-5} active {ipv4|ipv6|ipx} {on|off} Configuring a user account for SNMP v3 TRAP msh> snmp v3trap {1-5} account "account_name" Enter an account name using up to 32 alphanumeric characters. Deleting an SNMP v3 TRAP user account msh> snmp v3trap {1-5} clear account Configuring an SNMP v3 encryption algorithm msh> snmp v3auth {md5|sha1} Configuring SNMP v3 encryption msh> snmp v3priv {auto|on} Set "auto" for automatic encryption configuration 6 Set "on" for mandatory encryption configuration. sntp The printer clock can be synchronized with a NTP server clock using Simple Network Time Protocol (SNTP). Use the "sntp" command to change SNTP settings. View settings msh> sntp NTP server address configuration You can specify the IP address of the NTP server. msh> sntp server "IP_address" Interval configuration msh> sntp interval "polling_time" • You can specify the interval at which the printer synchronizes with the operator-specified NTP server. The default is 60 minutes. • The interval can be entered from 0, or between 16 and 10,080 minutes. • If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After that, the printer does not synchronize with the NTP server. 249
![](/manual_guide/products/ricoh-aficio-sp-c811dn-software-guide-5d212b2/251.png)