Ricoh Aficio SP C811DN Software Guide - Page 228
Remote Maintenance by telnet, Using telnet
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
6. Monitoring and Configuring the Printer Remote Maintenance by telnet • Remote Maintenance should be password-protected so that access is allowed to administrators only. • The password is the same as the one of Web Image Monitor administrator. When the password is changed using "mshell", other passwords change also. • Some commands cannot be used depending on your printer. Using telnet Follow the procedure below to use telnet. • Only one user at a time can log on to perform remote maintenance. 1. Use the IP address or the host name of the printer to start telnet. 6 % telnet "IP_address" 2. Enter your user name and password. Contact your administrator for information about the settings. 3. Enter a command. 4. Quit telnet. msh> logout The configuration message about saving the changes appears. 5. Enter "yes" to save the changes, and then press the [OK] key. If you do not want to save the changes, enter "no", and then press the [OK] key. To make further changes, enter "return" at the command line, and then press the [OK] key. • If the message "Can not write NVRAM information" appears, the changes are not saved. Repeat the procedure above. • When the changes are saved, the network interface board is reset automatically with that changes. • When the network interface board resets, the print job in print process will be printed. However, print jobs in queue will be canceled. 226