Ricoh Aficio SP C811DN Software Guide - Page 285

Message List Message Problem and solutions child process exec error! (process name) The network service failed to start. Turn the printer off and then on. If this does not work, contact your service or sales representative. Client password rejected The client's password was rejected. Check the client password. Client tls certificate rejected The client's TLS certificate was rejected. Check the certificate. Connected DHCP Server(). The IP address was successfully received from the DHCP server. Could not attach to FileServer (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server con- figuration. Could not attach to PServer (In the remote printermode) Connection to the print 6 server has not been established. The print server has refused the connection. Check the print server configuration. Current Interface Speed: xxxMbps Speed of the network (10Mbps, 100 Mbps, or 1Gbps). Current IP address Current IPv4 address. Current IPX address Current IPX address DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start The DHCPCD service (dhcp client service) has started. dpsd is disabled. Communication via PictBridge is unavailable because PictBridge is disabled in the security mode. Enable PictBridge in the security mode. 283