Ricoh Aficio SP C811DN Software Guide - Page 69
If Bidirectional Communication is Disabled, Under Windows 2000/XP and Windows Server 2003 - ps driver
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Making Option Settings for the Printer • The standard TCP/IP port must be used without changing the default port name (for Windows 2000/XP and Windows Server 2003). • Microsoft TCP/IP print IPv4 address must be specified for use (for Windows NT 4.0). • IPP port name must include the IPv4 address when using the IPP protocol. 1 When connected with USB The printer must be connected to the computer's USB port using the USB interface cable. The computer must support bidirectional communication. • Install SmartDeviceMonitor for Client from the CD-ROM provided. If Bidirectional Communication is Disabled Set up option settings when bidirectional communications are disabled. • Under Windows 2000/XP and Windows Server 2003, Manage Printers permission is required to change the printer properties in the [Printers] folder. Log on as an Administrators or Power Users group member. • Under Windows NT 4.0, Full Control permission is required to change the printer properties in the [Printers] folder. Log on as an Administrators or Power Users group member. 1. On the Start menu, point to [Settings], and then click [Printers]. The [Printers] window appears. 2. Click the icon of the printer you want to use. 3. On the File menu, click [Properties]. 4. Click the [Change Accessories] tab. If options in the [Change Accessories] tab are disabled, bidirectional connection is enabled. In this case, no change is necessary for option settings. If you are using the RPCS printer driver, click the [Change Accessories] tab. If you are using the PS printer driver, click the [Device Settings] tab. 5. Select options installed from the Option area, and then make the necessary settings. 6. Select the total amount of the memory in [Total Memory:], when the optional SDRAM module is added. 7. Under [Paper source tray settings:], click and highlight the tray to be used, and then select the appropriate size, position, and type for the tray. Select the [Tray locking] check box to exclude the tray from the targets of automatic tray selection. 8. Click [OK] to close the printer properties dialog box. 67