Ricoh Aficio SP C811DN Software Guide - Page 249
Effective Protocol:IPv4/IPv6/IPX, all access settings for that protocol are disabled.
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Remote Maintenance by telnet Effective Protocol:IPv4/IPv6/IPX • If "-p" is added, you can view settings one by one. • To display the current community, specify its registration number. Display msh> snmp ? Community name configuration msh> snmp "number" name "community_name" • You can configure ten SNMP access settings numbered 1-10. • The printer cannot be accessed from SmartDeviceMonitor for Admin or SmartDeviceMonitor for Client if "public" is not registered in numbers 1-10. When changing the community name, use SmartDeviceMonitor for Admin and SNMP Setup Tool to correspond with printer settings. • The community name can be entered using up to 15 characters. Deleting community name msh> snmp "number" clear name Access type configuration 6 msh> snmp "number" type "access_type" Access type no read write trap Type of access permission not accessible read only read and write user is notified of trapmessages Protocol configuration msh> snmp {ipv4|ipv6|ipx} {on|off} • Use the following command to set protocols "active" or "inactive": If you set a protocol "inactive", all access settings for that protocol are disabled. • Specify "ipv4" for IPv4, "ipv6" for IPv6, or "ipx" for IPX/SPX. • {on} means "active" and {off} means "inactive". • All protocols cannot be turned off concurrently. Configuration of protocol for each registration number msh> snmp "number" active {ipv4|ipv6|ipx} {on|off} • To change the protocol of access settings, use the following command. However, if you have disabled a protocol with the above command, activating it here has no effect. 247