Ricoh Aficio SP C811DN Software Guide - Page 238
ifconfig, IEEE 802.11b Interface
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
6. Monitoring and Configuring the Printer View settings msh> hostname IPv4 Configuration msh> hostname "interface_name" "printer_name" • Enter the printer name using up to 63 alphanumeric characters. • You cannot use a printer name starting with "RNP" or "rnp" • The Ethernet interface and IEEE 802.11b interface will have the same printer name. • wlan can be specified only when the IEEE 802.11b interface unit is installed. Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b interface Initializing the printer name for each interface 6 msh>hostname "interface_name" clear "name" ifconfig Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer. View settings msh> ifconfig IPv4 Configuration msh> ifconfig "interface_name" "parameter" "address" • If you did not enter an interface name, it is automatically set to the Ethernet interface. • wlan can be specified only when the IEEE 802.11b interface unit is installed. Interface name Interface configured ether Ethernet Interface wlan IEEE 802.11b Interface The following explains how to configure an IPv4 address 192.168.15.16 on Ethernet interface. msh> ifconfig ether 192.168.15.16 IPv6 Configuration msh> ifconfig ether inet6 "interface_name" "prefixlen" 236