Ricoh C410DN Hardware Guide - Page 112
Specifying Custom Size Paper for the Bypass Tray, Paper Input
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Paper and Other Media E Press the {Menu} key to return to the initial screen. Note ❒ To load thick paper, OHP transparencies, or envelopes, make settings for thick paper, envelope, or OHP transparencies using the control panel and printer driver. ❒ The number of pages that can be loaded in the bypass tray differs depending on paper type. Make sure paper is not stacked above the paper guides inside the bypass tray. Specifying Custom Size Paper for the Bypass Tray Important ❒ When loading custom size or special paper, specify the paper size using the control panel and printer driver. 5 ❒ Paper sizes between 140 - 900 mm in length and 70 - 216 mm in width can be loaded in the bypass tray. However, the printer can be set to print on paper up to 680 mm in length when using the RPCS printer driver, 677 mm when using the PS3 printer driver, and 432 mm when using the PCL printer driver. ❒ The custom paper size selected using the printer driver overrides that selected using the control panel. Do not configure settings using the control panel if you have already made settings using the printer driver. However, when printing with a printer driver other than the RPCS printer driver, you must configure the settings using the control panel. ❒ You cannot print on custom size paper with an application that does not support the custom size setting. A Press the {Menu} key. K C M Y AQC001S B Select [Paper Input] using {T} or {U}, and then press the {OK} key. 100