Ricoh C410DN Hardware Guide - Page 81
Making Network Settings for Using Netware, Auto Select, Auto Se, Host Interface, Network
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Ethernet Configuration Making Network Settings for Using Netware If you use NetWare, select the frame type for NetWare. Select one of the items below if necessary. • Auto Select • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP Important ❒ Usually, use the default setting ([Auto Select]). When you first select [Auto Select], the frame type detected by the printer is adopted. If your network can 4 use more than two frame types, the printer may fail to select the correct frame type if [Auto Select] is selected. In this case, select the appropriate frame type. A Press the {Menu} key. K C M Y AQC001S B Select [Host Interface] using {T} or {U}, and then press the {OK} key. C Select [Network] using {T} or {U}, and then press the {OK} key. 69