Ricoh C410DN Software User Guide - Page 218
dns, msh> dns 1 server 192.168.15.16
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Monitoring and Configuring the Printer ❖ Specifying the timeout and APL termination settings msh> diprint apl {async | cync} • Specifies whether or not to synchronize the timeout and APL termination. dns Use the "dns" command to configure or display DNS (Domain Name System) settings. ❖ View settings The following command displays current DNS settings: msh> dns ❖ IPv4 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: msh> dns 1 server 192.168.15.16 6 • You can register IPv4 DNS Server address. • You can register up to three IPv4 DNS server numbers. • You cannot use "255.255.255.255" as the DNS server address. ❖ IPv6 DNS server configuration The following command enables or disables the IPv6 DNS server address: msh> dns "number" server6 "server address" • You can register IPv6 DNS Server address. • You can register up to three IPv6 DNS server numbers. ❖ Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name ether wlan Interface configured Ethernet interface IEEE 802.11b interface 206