Ricoh C410DN Software User Guide - Page 221
ifconfig, Changing the Interface
UPC - 026649025341
View all Ricoh C410DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Remote Maintenance by telnet ❖ Initializing the printer name for each interface msh>hostname "interface_name" clear "name" ifconfig Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer. ❖ View settings msh> ifconfig ❖ IPv4 Configuration msh> ifconfig "interface_name" "parameter" "address" • If you did not enter an interface name, it is automatically set to the Ethernet interface. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name Interface configured ether wlan Ethernet Interface IEEE 802.11b Interface 6 The following explains how to configure an IPv4 address 192.168.15.16 on Ethernet interface. msh> ifconfig ether 192.168.15.16 ❖ IPv6 Configuration msh> ifconfig ether inet6 "interface_name " "prefixlen" The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 ❖ Netmask configuration msh> ifconfig "interface_name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface. msh> ifconfig ether netmask 255.255.255.0 ❖ Broadcast address configuration msh> ifconfig "interface_name" broadcast "address" ❖ Changing the Interface msh> ifconfig "interface" up • You can specify either the Ethernet interface or IEEE 802.11b interface when using the optional IEEE 802.11b interface unit. 209