Ricoh C410DN Software User Guide - Page 283

Printing Files Directly from Windows Reference For details about registering the printer's host name in the hosts file, see p.268 "Using a Host Name Instead of an IPv4 Address". ftp Use the "put" or "mput" command according to the number of files to be printed. ❖ When one file is printed ftp> put \pass name\file name [option] ❖ When multiple files are printed ftp> mput \pass name\file name [\pass name\file name...] [option] A Formulate the printer's IP address or the host name of the hosts file printer as an argument and use the "ftp" command. % ftp printer's IP address B Enter the user name and password, and then press the {OK} key. For details about the user name and password, consult your network administrator. User: Password: C When printing a binary file, set the file mode to binary. ftp> bin 8 When printing a binary file in ASCII mode, print may not come out correctly. D Specify files to be printed. The following shows the examples of printing a PostScript file named "file 1" in the "C:\PRINT" directory and printing file 1 and file 2. ftp> put C:\PRINT\file1 filetype=RPS ftp> mput C:\PRINT\file1 C:\PRINT\file2 E Quit ftp. ftp> bye Note and ";"cannot be used for filenames. File names will be read as option strings. ❒ For "mput" command, option can not be defined. ❒ For "mput" command, "*" and "?" can be used as wild cards in file names. ❒ When printing a binary file in ASCII mode, print may not come out correctly. 271