Ricoh FAX 1190L User's Guide - Page 29
Getting started, Initial setup, Setting the Date and Time - sleep mode
View all Ricoh FAX 1190L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2 Getting started Initial setup Setting the Date and Time When the machine is not in use it will display the date and time. If you set up the Station ID the date and time displayed by your machine will be printed on every fax you send. If there is a power failure, you may have to reset the date and time. No other settings will be affected. Note Your machine can store the date and time up to 4 days if there is a power failure. 1 Press Menu/Set, 0, 2. 2.Date/Time 2 Enter the last two digits of the year. Press Menu/Set. 3 Enter two digits for the month. Press Menu/Set. (For example, enter 09 for September, or 10 for October.) 4 Enter two digits for the day. Press Menu/Set. (For example, enter 06 for 6th.) 5 Enter the time in 24-Hour format. Press Menu/Set. (For example, enter 15:25 for 3:25 P.M.) 6 Press Stop/Exit. The LCD now shows the date and time whenever the machine is idle in Fax 2 mode. When the machine is in Sleep mode, the LCD shows Sleep. (See Sleep Time on page 2-8.) Setting Tone and Pulse dialling mode (Not available in some countries) 1 Press Menu/Set, 0, 4. 4.Tone/Pulse 2 Press ▲ or ▼ to select Pulse (or Tone). Press Menu/Set. 3 Press Stop/Exit. 2 - 1