Ricoh FAX 1190L User's Guide - Page 74
Making copies, Using the machine as a copier, Enter Copy mode, copier
View all Ricoh FAX 1190L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
' 8 Making copies Using the machine as a copier You can use your machine as a copier, making up to 99 copies at a time. Enter Copy mode Before making copies, make sure that (Copy) is illuminated in green. If it is not, press (Copy) to enter Copy mode. The default setting is Fax mode. You can change the number of seconds or minutes that the machine stays in Copy mode. (See Setting the Mode Timer on page 2-4.) (for EU and Asia/Oceania) The printable area of your machine begins at approximately 2 mm from both sides and 3 mm from the top or bottom of the paper. 2 mm 3 mm Unprintable area (for USA and Canada) The printable area of your machine begins at approximately 0.16 in. (4 mm) from both sides and 0.12 in. (3 mm) from the top or bottom of the paper. The LCD shows the default copy setting Copy Ratio Quality No of Copies 0.16" (4 mm) 0.12" (3 mm) Unprintable area Note This printable area shown above is for a single copy or a 1 in 1 copy using A4 size paper. The printable area changes with the paper size. 8 - 1