Ricoh IM 430F User Guide - Page 146
Card or Inserting/Removing USB Flash Memory Device, For First-time Users.
View all Ricoh IM 430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
4. Print 8. Press [Start]. Saving the scanned data in a memory storage device 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Press the [Print/Scan(Memory Storage Device)] icon. 3. Press [Scan to Storage Device]. 4. Insert a memory storage device in the media slot. For details about how to insert a memory storage device, see "Inserting/Removing an SD Card" or "Inserting/Removing USB Flash Memory Device", For First-time Users. 5. Press [USB] or [SD Card], depending on the type of the storage device that you are using. 6. Specify the location to save the scanned data. 7. Place the original. 8. If necessary, press [Scan Setting] to change the settings such as the file type or scan resolution. 9. To see the scanned image before saving it to a file, press [Preview]. 10. Press [Start]. 11. Press [Finish Scan] after scanning of the original has been completed. If there are more originals to be scanned, place the next original, and then press [Scan Next Original]. 12. When the preview screen appears, check the scanned image, and then press [Save]. • If the file name is not specified in [Scan Setting], the scanned image is saved under the name that conforms to the following naming rules: • For single page format: Transmission date and time (YYYYMMDDHHMMSSMMM) + 4 digit serial page number (_nnnn) + extension (.tif/.jpg/.pdf) 144