Ricoh IM 430F User Guide - Page 186

8. Adding Paper and Toner paper is output facing the same direction, specify different input trays for one-sided and twosided printing. Note also that two-sided printing must be disabled for the tray specified for one-sided printing. • For details about how to make two-sided prints, see "Printing on Both Sides of Sheets", Print. Specifying the Paper Setting for the Bypass Tray If you are using copier function, you can register the paper setting of the paper that is loaded on the bypass tray. • If you select [Machine Setting(s)] in [Bypass Tray] under [Tray Setting Priority] in [System] of the Printer Features menu, the settings made using the control panel have priority over the printer driver settings. For details, see "System", Print. • The default of [Bypass Tray] is [Driver / Command]. • Use A4 , 81/2 × 11 size OHP on Home screen 4 transparencies, and specify their size. • Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the print side down. • When printing onto OHP transparencies, remove printed sheets one by one. 1. Press [Change Setting] on the bypass tray paper settings screen. 2. Select the type of paper that is loaded. If you want to set the paper thickness, press [Paper Thickness] and set a paper thickness. 3. Press [Next]. 4. Select the size of the paper that is loaded. If you want to specify a custom size, press [Custom] and enter a paper size. 5. Press [OK] twice. Registering the current paper settings for the bypass tray 1. Press [Recall/Program] on the bypass tray paper settings screen. 2. Press [Program]. 3. Press the name area, and then enter a name. 4. Press OK. To apply the registered settings to the currently loaded paper, press [OK]. To finish specifying the settings, press [Cancel]. Recalling the paper settings for the bypass tray 1. Press [Recall/Program] on the bypass tray paper settings screen. 184