Ricoh IM 430F User Guide - Page 219
Check that IPv4 in [Effective, machine in [System Settings].
View all Ricoh IM 430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Messages Displayed When You Use the Fax Function Message "Check whether there are any network problems." [13-18] "Check whether there are any network problems." [13-24] "Check whether there are any network problems." [13-25] "Check whether there are any network problems." [13-26] Cause Solution Cannot access SIP server. • Check that the correct SIP Server IP Address is listed in [SIP Settings] of [Fax Features]. For details about SIP Settings, see "Initial Settings", Fax. • For details about network problems, contact your administrator. The password registered for the SIP server is not the same as the password registered for this machine. For details about network problems, contact your administrator. In [Effective Protocol], the IP address is not enabled, or an incorrect IP address has been registered. • Check that IPv4 in [Effective Protocol] is set to "Active" in [System Settings]. For details about effective protocol, see "Interface Settings", Connecting the Machine/ System Settings. • Check that the correct IPv4 address is specified for the machine in [System Settings]. For details about IPv4 address, see "Interface Settings", Settings. • For details about network problems, contact your administrator. The "Effective Protocol" and "SIP Server IP Address" settings are different, or an incorrect IP address has been registered. • Check that the correct IP address is specified for the machine in [System Settings]. For details about IP address, see "Interface Settings", Settings. • For details about network problems, contact your administrator. 217