Ricoh IM 430F User Guide - Page 26
Connecting in Infrastructure Mode, When you use IPv6
View all Ricoh IM 430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1. Getting Started 20. Enter WEP key, and then press [OK]. 21. Press [OK]. The settings are complete. You can connect the device in Ad hoc mode by specifying the SSID, channel, and security method that are specified for the machine. See the instructions supplied with the device for how to connect it in ad hoc mode. Connecting in Infrastructure Mode Use infrastructure mode to connect the machine to an access point. • The Wireless LAN interface board must be installed to use Infrastructure mode. • When you use IPv6, set Effective Protocol to Active in Interface Settings in System Settings. IPv6 is inactive as a factory default. When you enable IPv6, a link-local address is automatically set. • To use IPv6, consult your network administrator. 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Flick the screen to the left, and then press the User Tools icon ( ). 3. Press [Machine Features]. 4. Press [System Settings]. 5. Press [Interface Settings] tab. 6. Press [Network]. 7. Press [LAN Type]. 8. Press [Wireless LAN]. 9. Press [Wireless LAN]. 10. Press [Communication Mode], and then press [Infrastructure Mode]. 11. Press [OK]. 24