Ricoh IM 430F User Guide - Page 53
Installing the USB device server, Procedure for installing the USB device server
View all Ricoh IM 430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Installing the USB device server Installing the USB device server • Before beginning work, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the interface units. • Do not subject the USB device server to physical shocks. The optional USB device server is an interface board that adds an Ethernet port to the machine. With this option installed, two Ethernet cables can be connected at the same time using the standard port on the machine and an additional port on the USB device server. You can assign different IP addresses to each port, so the machine can print jobs from different network segments. Procedure for installing the USB device server 1. Check the contents of the package. 2. Turn the machine off and unplug the power cord. 3. Loosen the two screws and remove the slot cover. DVL370 The removed cover will not be reused. 4. Fully insert the interface board. DVL375 51