Ricoh IM 430F User Guide - Page 27
Obtaining an IP address automatically IPv4 DHCP, Specifying an IP address IPv4
![]() |
View all Ricoh IM 430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting and Setting the Network 12. Press [SSID Setting]. 13. Press [Enter SSID] and enter the SSID for the access point you want to connect to, and then press [OK]. 14. Press [OK]. 15. Press [Security Method]. 16. Enter the security method that is specified for the access point you want to connect to. Press [WEP] or [WPA2], and then press [Enter] on the screen to enter your password. If you do not use security setting, select [No]. 17. Press [OK]. The settings are complete. To check the connection status, press [Wireless LAN Signal] in [Wireless LAN] in [Interface Settings] in [System Settings] and confirm the signal status. Obtaining an IP address automatically (IPv4 DHCP) The machine is set to obtain IP addresses automatically as a factory default. 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Flick the screen to the left, and then press the [User Tools] icon ( ). 3. Press [Machine Features]. 4. Press [System Settings]. 5. Press [Interface Settings] tab. 6. Press [Network]. 7. Press [Machine IPv4 Address]. 8. Press [Auto-Obtain (DHCP)]. 9. Press [OK]. Specifying an IP address (IPv4) 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Flick the screen to the left, and then press the [User Tools] icon ( ). 25
![](/manual_guide/products/ricoh-im-350f-user-guide-cb48f3a/27.png)