Ricoh SP 201Nw User Guide - Page 20
Connecting in Ad-hoc mode using control panel, Shared Key - WEP
View all Ricoh SP 201Nw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. Guide to the Machine Security Method Key Length Open System - WEP 64 bit 128 bit Shared Key - WEP 64 bit 128 bit Key Format ASCII Hexadecimal ASCII Hexadecimal ASCII Hexadecimal ASCII Hexadecimal WEP Key (Maximum character) 5 characters 10 characters 13 characters 26 characters 5 characters 10 characters 13 characters 26 characters *1 The key length, key format, and WEP key cannot be configured. 13. Enter [WEP Key / Passphrase (PSK):]. 14. If it is necessary to configure the IPv4 address, click [IPv4 Configuration]. The IPv6 address can be configured only by using Web Image Monitor. 15. Click [OK]. After a setting is changed, the machine automatically restarts. 16. Using the Wi-Fi status report, you can check whether the connection has succeeded or failed. If [Wireless LAN Status Report:] is set to [On], a report confirming the completion of wireless LAN setup is printed. If "OK" appears for "Connection", the connection has succeeded. If "Failed" appears for "Connection", try configuring the settings again. Connecting in Ad-hoc mode using control panel 1. Make sure the Ethernet cable is not connected to the machine. 2. Switch on the machine. Go to the next step after the power indicator has flashed three times. 3. Hold down the [Job Reset] key. Hold the key down for two seconds or longer makes the power indicator flash. 18