Ricoh SP 201Nw User Guide - Page 42
Configuring the IPv4 settings, Displays the MAC address Media Access Control Address of the network
View all Ricoh SP 201Nw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Configuring the Machine Using Utilities Item LAN Type Network MAC Address I/O timeout (Network) Ethernet Speed Description Switch the interface between Ethernet and wireless LAN. This is available only if the device supports both interfaces. Displays Ethernet operation status. Displays the MAC address (Media Access Control Address) of the network interface board. Select whether or not to apply a timeout limit if the machine takes longer than a specified time to process a job. Ethernet communication speed. For normal use, select Auto Select. This allows the device to select the optimum speed. If communication with the device fails, select 10Mbps Full Duplex, 10Mbps Half Duplex, 100Mbps Full Duplex, or 100Mbps Half Duplex. Configuring the IPv4 settings Click [IPv4] to display the page for configuring the IPv4 settings. • In [LAN Type] in [Interface Settings], you can select [Ethernet] to display the wired LAN IP address, or [Wireless LAN] to display the wireless LAN IP address. 40