Ricoh SP 201Nw User Guide - Page 43

Auto-Obtain DHCP selected, IPv4 Address

Page 43 highlights

Using Web Image Monitor IPv4 Item IPv4 Ethernet Item Host Name DHCP Domain Name IPv4 Address Subnet Mask DDNS Indicates that IPv4 is enabled. Description Description Enter the host name you want to set for the network interface board or wireless LAN interface unit, using up to 63 characters. The default is RNP, followed by the MAC address of the active interface board. If you change the name to other than the default, the new name cannot begin with "RNP" or "rnp". Select [Enable] to automatically configure the network settings using the DHCP server. Select [Disable] to manually configure the network settings. Specify whether to use the domain name obtained from the DHCP server, or the domain name set for the device. • "Auto-Obtain (DHCP)" selected When using DHCP, the domain name obtained from the DHCP server is used. If the domain name cannot be obtained from the DHCP server, the domain name set for the device is used. • "Specify" selected The domain name set for the device is used. Enter the domain name, using up to 63 characters. Spaces cannot be used. Enter the IPv4 address of the network interface board or wireless LAN interface unit. At DHCP operation, the address obtained from the DHCP server is used. Enter the sub-net mask of the network interface board or wireless LAN interface unit. The sub-net mask is a part of the IP address used as a network address. When using DHCP, the sub-net mask obtained from the DHCP server is used. Select whether DDNS (Dynamic DNS) name resolution for the network interface board or wireless LAN interface unit is active or inactive. When active, the DNS database is immediately updated. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

IPv4
Item
Description
IPv4
Indicates that IPv4 is enabled.
Ethernet
Item
Description
Host Name
Enter the host name you want to set for the network interface board or wireless
LAN interface unit, using up to 63 characters. The default is RNP, followed by
the MAC address of the active interface board. If you change the name to other
than the default, the new name cannot begin with "RNP" or "rnp".
DHCP
Select [Enable] to automatically configure the network settings using the DHCP
server. Select [Disable] to manually configure the network settings.
Domain Name
Specify whether to use the domain name obtained from the DHCP server, or the
domain name set for the device.
"Auto-Obtain (DHCP)" selected
When using DHCP, the domain name obtained from the DHCP server is
used. If the domain name cannot be obtained from the DHCP server, the
domain name set for the device is used.
"Specify" selected
The domain name set for the device is used. Enter the domain name, using
up to 63 characters. Spaces cannot be used.
IPv4 Address
Enter the IPv4 address of the network interface board or wireless LAN interface
unit.
At DHCP operation, the address obtained from the DHCP server is used.
Subnet Mask
Enter the sub-net mask of the network interface board or wireless LAN interface
unit. The sub-net mask is a part of the IP address used as a network address.
When using DHCP, the sub-net mask obtained from the DHCP server is used.
DDNS
Select whether DDNS (Dynamic DNS) name resolution for the network interface
board or wireless LAN interface unit is active or inactive.
When active, the DNS database is immediately updated.
Using Web Image Monitor
41