Samsung ML-1651N User Manual (user Manual) (ver.1.00) (English) - Page 138
Network Connection, You must con your printer for the network.
View all Samsung ML-1651N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Macintosh Installation Network Connection If you have a printer with 10/100Base-TX network interface card installed (standard for ML-1651N, option for ML-1650), you can connect to an Ethernet network. Use a Category 5 twisted pair cable with RJ-45 connectors for 10/100Base-T Ethernet. 1 Plug one end of the network cable into the twisted-pair connector on the back of the printer. 2 Connect the other end to the network hub. Note: You must configure your printer for the network. For information about configuring your printer, refer to the Network User's Guide. USING YOUR PRINTER WITH A MACINTOSH C.3
If you have a printer with 10/100Base-TX network interface
card installed (standard for ML-1651N, option for ML-1650),
you can connect to an Ethernet network. Use a Category 5
twisted pair cable with RJ-45 connectors for 10/100Base-T
Ethernet.
1
Plug one end of the network cable into the twisted-pair
connector on the back of the printer.
2
Connect the other end to the network hub.
Network Connection
Macintosh Installation
Note:
You must configure your printer for the network. For
information about configuring your printer, refer to the
Network User’s Guide.
C.
3
U
SING
Y
OUR
P
RINTER WITH A
M
ACINTOSH