Samsung ML-1651N User Manual (user Manual) (ver.1.00) (English) - Page 54
Printing on Transparencies
View all Samsung ML-1651N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Printing on Transparencies Guidelines • Only use transparencies recommended for use in laser printers. • Do not load more than 20 transparencies into the Multi-Purpose Tray at a time. • Make sure that the transparencies are not wrinkled or curled, and that they do not have any torn edge. • Hold the transparencies by the edges and avoid touching the print side. Oils from your fingers that are deposited on the transparency can cause print quality problems. • Be careful not to scratch or leave fingerprints on the print side. 1 Open the Multi-Purpose Tray and pull the extender out of its full-length position. 2 Load transparencies with print side up, and the top with the adhesive strip entering the printer first. Adjust the guide to fit the width of the transparencies. 3 When you print on transparencies, configure the paper source, type and size in the software application. For details, see page 5.3. Notes: • To prevent transparencies from sticking together, remove them from the output tray as they are printed. • Place transparencies on a flat surface after removing them from the printer. PRINT MEDIA 4.15