Samsung NV11 User Manual (ENGLISH) - Page 61

Setup menu [OSD set] ƈ You can check shooting (Recording mode) and displayed image (Play back mode) information. Full Ȝ Basic Hide LCD Save OSD Set OSD Set File Language Date&Time Exit:BACK [Recording mode menu] Full Basic Ȝ Hide OSD Set OSD Set File Language Date&Time Exit:BACK [Play back mode menu] [Full] : When the smart button is touched, the icons will be enlarged and OSD will be displayed. [Basic] : When the smart button is touched, the icons will be enlarged and OSD will not be enlarged. [Hide] : If the camera doesn't operate for about 3 seconds, all OSD will disappear. When the shutter is pressed down or half way down, the shutter speed and auto focus frame will display. OSD may display by using the camera buttons except for the shutter button. [LCD save] : If the camera is not used for about 30 seconds, the power and camera status lamps blink and the LCD monitor turns off. (LCD save is only applied to the Recording mode menu.) [ File name ] ƈ This function allows the user to select the file naming format. [Series] : New files are named using numbers that follow the previous sequence, even when Series Reset OSD Set OSD Set a new memory card is used, or after formatting, or after deleting all pictures. [Reset] : After using the reset function, the next file name will be set from 0001 even after Ȝ File Language Date&Time Exit:BACK formatting, deleting all or inserting a new memory card. - The first stored folder name is 100SSCAM, and the first file name is SNV10001. - File names are assigned sequentially from SNV10001 ƍ SNV10002 ƍ ~ ƍ SNV19999. - The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM. - The files used with the memory card conform to the DCF (Design rule for Camera File systems) format. - File names assigned in the Biz mode, will be set SB1ZXXXX ŝ60Ş