Sharp AR-M355N AR-M355 AR-M455 Operation Manual Suite - Page 244
Using The Key Operator Programs
View all Sharp AR-M355N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
USING THE KEY OPERATOR PROGRAMS The procedure for configuring the key operator programs is explained below using the "Key operator code change" program as an example. Follow the same steps to configure the programs that are explained beginning on page 7. 1 Press the [CUSTOM SETTINGS] key. 2 Touch the [KEY OPERATOR PROGRAMS] key. SENDER CONTROL FAX DATA RECEIVE/FORWARD KEY OPERATOR PROGRAMS 3 Use the numeric keys to enter the five-digit key operator code. Each time a number is entered, the dashes (-) KEY OPERATOR CODE in the display will change to asterisks ( ). The factory default setting for the key operator code number is 00000. 4 Touch the [KEY CHANGE] key . PRINTER NGS SETTINGS KEY OPERATOR CODE CHANGE program on page 7. OPERATOR CODE If you wish to configure a different program, select the program in this step. A setting screen for the selected program will appear. See the explanation of the 5 Use the numeric keys to enter the new 5-digit key operator code. Use a number for the key operator code that 00000 ----- has not been programmed as an account number for auditing mode (a number that has been programmed as an account number cannot be used). The entered number will be the new key operator code. Be sure to remember this number. 6 Touch the [OK] key. You will return to the screen of step 4. This completes the procedure for changing OK the key operator code. If you wish to configure another program, touch the key of the desired program in the screen of step 4. 7 Press the [CA] key to exit the program. You will exit the key operator programs and return to the main screen. 4