Sharp AR-M355N AR-M355 AR-M455 Operation Manual Suite - Page 60

FINISHER The finisher can deliver collated sets either stapled or unstapled. Unstapled sets can be offset stacked from the previous set for easy separation of the sets. Part names Latch Release the latch to open the finisher for misfeed removal. Top cover Open for misfeed removal. Top tray Printer, copier and fax output can be delivered here. To print onto large paper (11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3 or B4), extend the tray. Staple box Pull the box out to replace the staple cartridge or to remove jammed staples. Offset tray Stapled sets or sets to be offset will be delivered here. NOTES ● Do not put pressure on the finisher (particularly each tray). ● Do not place anything on the top cover. Doing so will interfere with the machine's paper handling during duplex 3 printing. ● The tray moves up and down during operation. Be careful not to impede its movement. ● The finisher requires the installation of other peripheral devices in order to be functional and cannot be installed together with some other devices. The table on page 8-4 shows the configurations which are compatible. Specifications Name Finisher (AR-FN6) Number of trays 2 Paper output Tray type Print face down Top tray: normal tray, Lower tray: offset tray Tray capacity Paper sizes Top tray: 500 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2) Lower tray: 750 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2) Top tray: same as the specifications of paper for feeding in the main unit Lower tray: Max. 8-1/2" x 11" or A4, Min. B5 Paper weight Paper types Tray full detection Top tray: same as the specifications of paper for feeding in the main unit Lower tray: 16 to 34 lbs. or 60 to 128 g/m2 Top tray: same as the specifications of paper for feeding in the main unit Lower tray: plain paper only Provided in both the top tray and the lower tray Offset function Provided for the lower tray only. The offset amount is approx. 1 inch (25 mm) Paper sizes for stapling Stapling capacity Staples 8-1/2" x 11", A4, and B5 30 sheets* (8-1/2" x 11" or A4 or smaller 20 lbs. or 80 g/m2) *Up two sheets of cover stock (34 lbs. or 128 g/m2) can be included. Single staple can be placed in the top left or lower left corners or two staples can be centered on the left side Power supply Supplied from machine Dimensions Weight 18-1/8" (W) x 20-7/8" (D) x 20" (H) (460 mm (W) x 530 mm (D) x 508 mm (H)) Approx. 46.3 lbs. (21 kg) Specifications are subject to change for improvement without notice. Supplies AR-SC1 staple cartridges must be used for this finisher. The cartridge package contains three cartridges approx. 3000 staples each. 3-7