Sharp HT-X1 HT-X1 Operation Manual - Page 17

System installation Installation image (with optional accessories): Subwoofer/ amplifier unit Front speaker (left) Center speaker Front speaker (right) Surround speaker (left) Main unit Surround speaker (right) HT-X1 " Placing the speaker system The best surround effect will be achieved by placing each speaker at the same distance from the listening position. It is recommended to arrange the speakers as shown below. Front speaker (left) Center speaker Front speaker (right) Subwoofer/ amplifier unit Surround speaker (left) Default setting: 6 feet (2 m) Surround speaker (right) Preparation for Use " Magnetically shielded speakers The front and center speakers may be placed beside or near the TV as they are magnetically shielded. However, color variation may occur, depending on the type of the TV. If color variation occurs... Turn off the TV (from the power switch). After 15 - 30 minutes, turn the TV on again. If the color variation is still present... Move the speakers further away from the TV. Refer to the user's manual of the TV for details. Notes: ! The default distance is set to 6 feet (2 m). If speakers cannot be placed at equal distances, refer to "Speaker delay setting" (see page 53). ! Place the TV halfway between the front speakers. ! It is recommended that the center speaker be placed near the television. ! Place the surround speakers at a position just above the height of your ears. ! Place the subwoofer/amplifier unit on a sturdy and stable surface as it tends to vibrate while reproducing bass sounds. Same distance Note: The surround speakers and subwoofer/amplifier unit are not magnetically shielded. Front speaker (left) Front speaker (right) Center speaker 17