Sharp HT-X1 HT-X1 Operation Manual - Page 54
Changing the default setting of the amplifier continued
UPC - 074000366138
View all Sharp HT-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
HT-X1 Changing the default setting of the amplifier (continued) " Speaker level setting If sounds from the speakers are uneven, you can equalize them by adjusting the speaker levels. 1 Press the SET UP AMP button. 2 Within 10 seconds, press the or button to select "SP LEVEL", and then press the ENTER button. Amplifier Setup Speaker Delay Speaker Level Test Tone " Test tone You can check each speaker sound by a test tone. Readjust the volume set in "Speaker level setting". 1 Press the SET UP AMP button. 2 Within 10 seconds, press the or button to select "TONE", and press the ENTER button. Amplifier Setup Speaker Delay Speaker Level Test Tone Select ENTER Enter Return Select ENTER Enter Return Advanced Features 3 Within 10 seconds, press the or button to select the desired speaker. The indicator of the selected speaker flashes. Speaker Level Front L Center Front R Surround R Surround L Sub Woofer Select Change 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Return 4 Within 10 seconds, press the or button to adjust the level. ! You can adjust the level at 1 dB in- tervals. ! To set the level of other speakers, repeat the operation from step 3. Speaker Level Front L Center Front R Surround R Surround L Sub Woofer 0 dB 0 dB 0 dB +3 dB 0 dB 0 dB Select Change Return 5 Press the RETURN button twice. The setting is complete. Notes: ! The speaker level setting is only available for the front speakers and subwoofer/amplifier unit when the surround is "STEREO" or "VIRTUAL (SURROUND)". ! If subwoofer/amplifier unit sound is distorted, lower the subwoofer/amplifier unit level. The test tone will be heard from each speaker in order, at about 2-second intervals. Test Tone Front L Center Front R Surround R Surround L Sub Woofer 0 dB 0 dB 0 dB +3 dB 0 dB 0 dB Select Change Return To adjust speaker levels While the test tone is heard: Adjust the level with the or button. Press the or to select a speaker. 3 Press the RETURN button twice. The setting is complete. Note: The test tone is produced only from the front speakers and subwoofer/amplifier unit when the surround is "STEREO" or "VIRTUAL (SURROUND)". 54