Sharp HT-X1 HT-X1 Operation Manual - Page 52

HT-X1 Changing the default setting of the amplifier Change settings according to the connected speakers. Speaker delay setting (See page 53.) Speaker level setting (See page 54.) Test tone (See page 54.) Example: If the right surround speaker is 10 feet (3.3 m) away from the listening position, change settings as shown below (adjust the SR). CT FL FR CT FL FR SW SW If you press during the operation, you can go back one step. Advanced Features 10 feet (3.3 m) SL SR SL SR Default setting: 6 feet (2 m) 1 In "Speaker delay setting", set the right surround speaker (SR) to 10 feet (3.3 m). 2 In "Speaker level setting", slightly increase the level of the right surround speaker as it is a little farther than others (see page 54). 3 In "Test tone", check the sound from each speaker (see page 54). Speaker type FL Front speaker (Left) CT Center speaker FR Front speaker (Right) SR Surround speaker (Right) SL Surround speaker (Left) SW Subwoofer/amplifier unit Delay range 1 to 29 ft 1 to 29 ft 1 to 29 ft 1 to 29 ft 1 to 29 ft Level range - 6 dB to + 6 dB - 6 dB to + 6 dB - 6 db to + 6 dB - 6 dB to + 6 dB - 6 dB to + 6 dB - 10 dB to + 10 dB Default settings: Delay - - - 6 ft (2 m) Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW) 52