Sharp HT-X1 HT-X1 Operation Manual - Page 30

HT-X1 Playing a disc (continued) DVD Operation Notes: ! When you turn on the power or switch the input to "DVD" initial- ization starts and operation is not possible for a few seconds. ! Stop positions may be recorded on some discs. When you play such a disc, playback stops there. ! During an operation, " " may appear indicating that the opera- tion is disabled by the disc. ! Some DVD may not function as described in the manual. See the disc jacket for restrictions. ! Some CD-R/CD-RW may not play properly due to the status of the disc or equipment used for recording. Change the recording speed or disc. For more details, see the manual for the equipment. ! Sound may skip at high volume depending on the disc. In this case, turn down the volume. Caution: ! Be careful not to damage the disc when inserting or removing it. ! A disc does not play if damaged, dirty or loaded upside down. ! Make sure to remove the disc before transporting the main unit. Otherwise the disc inside may cause malfunction. ! Do not let coins, clips, etc. get into the disc insertion slot. Mal- function may occur. ! When attempting to play discs with scratches or of a different region number, or unplayable or restricted (*1) discs, an error message will appear on the TV display and the disc will not play. (*1) Viewing is prohibited on some DVDs according to the audience age. " To resume playback after stopping (resume play) You can resume playback from the point playback is stopped. 1 While the disc is playing, press the button. Pre-Stop The system stores the point you stopped. 2 To restart play, press the (DVD/CD ) button. Play Playback resumes from the point you left off. To cancel resume play: Press the button again. Stop Notes: ! The resume play feature is disabled on some discs. ! Depending on the disc, playback may resume slightly before the position where it was stopped. 30