Sharp HT-X1 HT-X1 Operation Manual - Page 53

In the stop mode, you can change the amplifier settings on the TV screen. 1 Press the SET UP AMP but- ton. The amplifier setting screen appears. Amplifier Setup Speaker Delay Speaker Level Test Tone Select ENTER Enter Return 2 Press the or button to select the menu and press the ENTER button. 3 Press the , , or button to change the setting. Speaker Delay Front L 6 FT Center 6 FT Front R 6 FT Surround R 6 FT Surround L 6 FT Select Change Return Repeat the operation as instructed. (The number of repetition depends on the setting item.) To change other settings, begin from step 2. 4 Press the RETURN button twice. The setting is complete. Notes: ! You cannot change the amplifier settings unless the input source is set to DVD/CD. ! The amplifier settings cannot be changed in the tuner mode and do not affect the tuner sound. " Speaker delay setting When some of the speakers are at a different distance from the listening point, you can select the speaker delay to make it seem as though the speaker distances are the same. 1 Press the SET UP AMP button. 2 Within 10 seconds, press the or button to select "SP DELAY", and then press the ENTER button. Amplifier Setup Speaker Delay Speaker Level Test Tone Select ENTER Enter Return 3 Within 10 seconds, press the or button to select the desired speaker. The indicator of the selected speaker flashes. Speaker Delay Front L Center Front R Surround R Surround L 6 FT 6 FT 6 FT 6 FT 6 FT Select Change Return 4 Within 10 seconds, press the or button to select the distance. ! You can change the distance in 1 foot (0.3 m) steps. ! To set the distance of other speak- ers, repeat the operation from step 3. 5 Press the RETURN button twice. The setting is complete. Speaker Delay Front L Center Front R Surround R Surround L 6 FT 6 FT 6 FT 10 FT 6 FT Select Change Return Note: The speaker delay setting is not available when the surround is "STEREO" or "VIRTUAL (SURROUND)". Advanced Features HT-X1 53