Sharp HT-X1 HT-X1 Operation Manual - Page 40

HT-X1 Useful operation (continued) " To play the contents between the specified points repeatedly (A-B repeat) You can play the desired portion repeatedly by specifying it during playback. 1 While a disc is playing, press the SHIFT button and then the A B REPEAT/ button. TV screen Unit display " To change the display on the main unit During playback, press the DISPLAY/(-DIMMER) button. Each time you press the button, the display changes as follows: DVD: Title elapsed time Title/Chapter number Chapter elapsed time A-B Set A This registers the start point (A). 2 Press the SHIFT button and then the A B REPEAT/ but- ton again to enter the end point (B). CD: Track elapsed time Total elapsed time DVD Operation A-B Repeat on A-B repeat plays from the start point (A) to the end point (B). 3 Press the SHIFT button and then the A B REPEAT/ but- ton to return to the normal playback. Notes: ! A-B repeat play is disabled on some discs. ! Some scenes in DVD may not allow A-B repeat play. ! A-B repeat play for DVD is possible only within a title. ! A-B repeat play for audio CD is possible only within a track. ! When you press the button, the current A-B repeat play is can- celed. (For DVD, press the button twice.) Notes: ! Title/chapter numbers or elapsed time may not appear depend- ing on the disc. ! The playing time of the disc specified on the jacket, etc. may not include silence between tracks, and may differ from that dis- played on the main unit. ! Elapsed time on the display does not indicate the actual time. 40