Sonos ZP80 User Guide - Page 20
Step 1: Connect first ZonePlayer to home network - setup
View all Sonos ZP80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2-2 Chapter 2: ZonePlayer Setup and Operation Step 1: Connect first ZonePlayer to home network 1. Connect the Ethernet cable from an open port on your router to any of the Ethernet switch connectors on the back of your ZonePlayer. Note: You can connect either a ZonePlayer 80 or a ZonePlayer 100 to your router. If you are going to use speakers in this music zone, you can connect a ZonePlayer 100 to your router. If you want to connect to an external amplifier, or to your computer's powered speakers, you can connect a ZonePlayer 80 to your router. • If your modem is currently plugged into the only network interface connector on your computer, you should install a standard router before continuing. If you don't have a router, go to http://faq.sonos.com/norouter for instructions. Or, • If you have structured (built-in) wiring that connects to a router located elsewhere in your home, you can connect the Ethernet cable from a live wall plate into one of the Ethernet switch connectors on the back of your ZonePlayer.