Sonos ZP80 User Guide - Page 28
Renaming a ZonePlayer, To rename using Sonos Controller - install
View all Sonos ZP80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2-10 Chapter 2: ZonePlayer Setup and Operation range (up to 100 ft. depending upon your home's layout). This means that you do not need to go to the effort of installing cables, and you can relocate your ZonePlayer(s) easily. Note: Thick walls, 2.4 GHz cordless telephones, or the presence of other wireless devices can interfere with or block the wireless network signals from your Sonos Digital Music System. Once you locate your ZonePlayer, if you are experiencing difficulty, it is advisable to relocate the ZonePlayer, change the wireless channel your music system is operating on (see "Selecting a different wireless channel"), or make a wired connection (Ethernet cable) either from your router to the ZonePlayer, or from one ZonePlayer to another. If you are having trouble placing your units within wireless range of each other, you can go to our Web site at http://faq.sonos.com/ range for more information. Use wireless connections when: • You do not want to install network cables • You may want to move the ZonePlayer • There is enough signal strength for the ZonePlayer to transmit and receive data reliably Renaming a ZonePlayer If you name a ZonePlayer incorrectly, or if you move your ZonePlayer to another room, you can rename it to suit your preference. To rename using Desktop Controller software 1. From the Zones menu, click Set Up Zones. 2. Select the ZonePlayer you wish to change, and click Settings. 3. From the Zone Name tab, select a name from the list, or type a new name for this ZonePlayer in the Zone Name field, and then click OK. To rename using Sonos Controller 1. From the Music menu, select System Settings>ZonePlayer Settings and press OK. 2. Use the scroll wheel to highlight the zone you wish to change, and press OK. 3. Select ZonePlayer Name, and press OK.