Sonos ZP80 User Guide - Page 85

4-2 Sonos Digital Music System User Guide 4. When instructed, press the Mute and the Volume Up buttons simultaneously on the ZonePlayer you are connecting. (Remember, the first ZonePlayer you install must connect to your home network using a standard Ethernet cable). ZonePlayer status indicator Mute button Volume up (+) Volume down (-) You can release the buttons as soon as the Mute indicator (green) and the ZonePlayer Status Indicator light (white) start to blink alternately. This takes approximately 1 second. Once the ZonePlayer is successfully connected, the ZonePlayer Status Indicator light will stop flashing and change to solid white (normal operation), and the Mute indicator will go out. During the setup process, you may be asked to configure your Macintosh's firewall. See 'Firewall Information' for help with this step. 5. Choose a ZonePlayer name from the pop-up menu, and then select Continue. 6. Choose one of the following options: • If you have another ZonePlayer to set up now, choose Yes, I want to add another ZonePlayer and select Continue. • If you don't want to set up another ZonePlayer, choose I do not want to add another ZonePlayer at this time, and select Continue. 7. When you are prompted to set up access to your music folders, choose Yes, set up my music now, and select Continue. Where is your music stored? • Depending upon where your music is stored, you may be asked to provide an admistrator name and password to allow access to your music folders. • If your Macintosh computer does not have Windows Sharing enabled, the Desk-