Sonos ZP80 User Guide - Page 27

Chapter 2: ZonePlayer Setup and Operation 2-9 connected to another Sonos Digital Music System, the ZonePlayer Status indicator may light solid white instead.) Mute; flashes green Status Indicator; flashes white 4. Choose one of the following options: • Use the Desktop Controller to add the ZonePlayer to your Sonos Digital Music System by selecting Zones>Set Up Zones>Add. Or, • Use a SonosController to add the ZonePlayer to your Sonos Digital Music System by selecting System Settings>Add a ZonePlayer from the Music menu. During the setup process, you will be asked to press and release the Mute and Volume Up buttons simultaneously on the ZonePlayer you are adding to the Sonos Digital Music System. • You may release the buttons as soon as the Mute indicator (green) and the ZonePlayer Status Indicator (white) start to blink alternately (this takes approximately 1 second.) • When the ZonePlayer has been successfully added to your music system, the Mute indicator will go out and the ZonePlayer Status indicator will change to solid white. Add a Controller You should charge your new Sonos Controller when you remove it from the packaging. Plug it into the power adapter, and then follow the Controller's on-screen prompts to add it to your music system (you can use the Controller while it is charging.) When and why should I use a wireless connection? The Sonos Digital Music system uses a built-in wireless connection to communicate between ZonePlayers. You can place ZonePlayers anywhere without physically connecting them to your computer network, as long as they are within transmitting