Sony CCD TRV16 Service Manual - Page 101
Auto White Balance Standard Data Input, Note 1, Note 2, Auto White Balance Adjustment
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
9. Auto White Balance Standard Data Input Subject Adjustment Page Adjustment Address Clear chart (Color bar standard picture frame) F 70 to 73 Note 1: Perform "Color Reproduction Adjustment" before this adjustment. Note 2: Check that the data of page: 2, address: 02 is data: 00. If not, turn the power of the unit OFF/ON. Switch setting: 1) NIGHT SHOT switch OFF Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Wait for 2 seconds. 3) Select page: 2, address: 01, and set data: 11, and press the PAUSE button of the adjusting remote commander. 4) Select page: 2, address: 01, and set data: 0D, and press the PAUSE button of the adjusting remote commander. (When the standard data is take in, the data will be automatically input to page: F, address: 70 to 73.) 5) Select page: 2, address: 02, and check that the data is "01". 6) Perform "Auto White Balance Adjustment". Processing after Completing Adjustments 1) Select page: 2, address: 01, and set data: 00, and press the PAUSE button of the adjusting remote commander. 2) Select page: 0, address: 01, and set data: 00. 10. Auto White Balance Adjustment Adjust to the proper auto white balance output data. If it is not correct, auto white balance and color reproducibility will be poor. Subject Filter Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value Clear chart (Color bar standard picture frame) Filter C14 for color temperature correction DDS display of LCD or TV monitor (Note 1) F 3A, 3B R ratio: 2B40 to 2BC0 B ratio: 5E40 to 5EC0 Note 1: Perform "Auto White Balance Standard Data Input" before this adjustment. Note 2: The right four digits of the display data at the right bottom side of the LCD and TV monitor is the object data. 00 XXXX n Object data Switch setting: 1) NIGHT SHOT switch OFF Adjusting method: 1) Place the C14 filter for color temperature correction on the lens. 2) Select page: 0, address: 01, and set data: 01. 3) Select page: D, address: 11, and set data: 02, and press the PAUSE button of the adjusting remote commander. 4) Select page: 2, address: 01, and set data: 3F, and press the PAUSE button of the adjusting remote commander. 5) Select page: 0, address: 03, and set data: 04. 6) Select page: F, address: 3A, and change the data, and adjust the average value of the DDS display data(Note 2) to the R ratio specified value. 7) Press the PAUSE button of the adjusting remote commander. 8) Select page: 0, address: 03, and set data: 05. 9) Select page: F, address: 3B, and change the data, and adjust the average value of the DDS display data(Note 2) to the B ratio specified value. 10) Press the PAUSE button of the adjusting remote commander. Processing after Completing Adjustments 1) Select page: D, address: 11, and set data: 00, and press the PAUSE button of the adjusting remote commander. 2) Select page: 0, address: 01, and set data: 00. 3) Select page: 2, address: 01, and set data: 00, and press the PAUSE button of the adjusting remote commander. 4) Select page: 0, address: 03, and set data: 00.