Sony CCD TRV16 Service Manual - Page 129
AFC f0 Adjustment VC-215 board, Filter f0 Adjustment VC-215 board
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
2. AFC f0 Adjustment (VC-215 board) Adjust the pull-in range of the A/D converted clock generator during playback. Mode Signal Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value VTR stop No signal Pin 4 of CN910 (AFC f0) Digital voltmeter F 4A A = 2.10±0.05Vdc Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 01, set data: 4D, and press the PAUSE button of the adjusting remote commander. 3) Select page: F, address: 4A, change the data and set the DC voltage (A) to the specified value. 4) Press the PAUSE button of the adjusting remote commander. 5) Select page: 3, address: 01, set data: 00, and press the PAUSE button of the adjusting remote commander. 6) Select page: 0, address: 01, and set data: 00. 3. Filter f0 Adjustment (VC-215 board) Minimize the chroma signal residual components during composite video signal input. Mode Signal Measurement Point Measuring Instrument Adjustment Page Adjustment Address Specified Value VTR stop No signal Pin 3 of CN910 (IR VIDEO) Oscilloscope F 4D Minimum residual chroma signal components (A = Bellow 35mV) Switch setting: LASER LINK ON (Red LED is lit) Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 01, set data: 4F, and press the PAUSE button of the adjusting remote commander. 3) Select page: F, address: 4D, change the data and minimize the residual chroma signal components (A). 4) Press the PAUSE button of the adjusting remote commander. 5) Select page: 3, address: 01, set data: 00, and press the PAUSE button of the adjusting remote commander. 6) Select page: 0, address: 01, and set data: 00. A H Fig. 5-3-7.