Sony CCD TRV16 Service Manual - Page 107
Monochrome Electronic Viewfinder, System Adjustments
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
1-5. MONOCHROME ELECTRONIC VIEWFINDER SYSTEM ADJUSTMENTS Note: CCD-TR315 CCD-TRV16/TRV16PK/TRV36/TRV36PK/TRV43/ TRV46/TRV46PK 1-5-1. Horizontal Slant Check Mode Signal Specified Value Playback Alighment tape : For checking operations (WR5-5NSP) Monoscope section ± 1.5 ° Adjusting method: 1) Adjust RV904 (BRIGHT) (VF-99 board) so that the CRT can be seen easily and clearly. 2) Check that the difference between the horizontal line and the tilt of the black mask satisfies the specified value. 1-5-2. Centering Adjustment Mode Signal Specified Value Playback Alighment tape : For checking operations (WR5-5NSP) Monoscope section ± 4% Adjusting method: 1) Use the centering adjustment ring and adjust so that the left, right, top, and bottom sides of the display are uniform. (Refer to Fig. 5-1-17.) Note : As the centering position changes due to earth magne- tism, rotate it 360˚ in the horizontal direction, and adjust with the center section of the modifying position. Fig. 5-1-16. Fig. 5-1-17. VF-99 BOARD (SIDE A) SOL901 C909 Fig. 5-1-18. 1-5-3. Focus Adjustment Mode Signal Playback Alighment tape : For checking operations (WR5-5NSP) Monoscope section Adjusting method: 1) Adjust the focus ring to obtain the optimum focus. (Refer to Fig. 5-1-17.) RV903 RV904