Sony CCD TRV16 Service Manual - Page 113
V-COM Adjustment PD-107 board, Note1, Color Adjustment PD-107 board
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
6. V-COM Adjustment (PD-107 board) Set the common electrode drive signal level of LCD to the specified value. Mode Signal Measurement point Measuring instrument Adjustment page Adjustment address Specified value VTR stop No signal Pin 4 of CN5501 (PANEL COM) of PD-107 board Oscilloscope E D5 A = 6.50 ± 0.05V Note1 : Perform "Bright Adjustment" and "Contrast Adjustment" before this adjustment. Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 01, set data: 55, and press the PAUSE button of the adjusting remote commander. 3) Select page: 2, address: 7D, and set data: 00. 4) Select page: E, address: D5, change the data and set the PANEL COM signal level (A) to the specified value. 5) Press the PAUSE button of the adjusting remote commander. 6) Select page: 3, address: 01, set data: 00, and press the PAUSE button of the adjusting remote commander. 7) Select page: 0, address: 01, and set data: 00. A 7. Color Adjustment (PD-107 board) Set the color saturation to the standard value. If deviated, the color will be to dark or light. Mode Signal Measurement point Measuring instrument Adjustment page Adjustment address Specified value VTR stop No signal Pin 3 of CN5501 (VG) of PD-107 board External trigger : Pin 4 of CN5501 (PANEL COM) Oscilloscope E D0 A = 0.07 ± 0.05V Adjusting method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 3, address: 01, set data: 57, and press the PAUSE button of the adjusting remote commander. 3) Select page: 2, address: 7D, and set data: 20. 4) Select page: E, address: D0, change the data and set the voltage (A) between the green and white to the specified value. 5) Press the PAUSE button of the adjusting remote commander. 6) Select page: 3, address: 01, set data: 00, and press the PAUSE button of the adjusting remote commander. 7) Select page: 2, address: 7D, and set data: 00. 8) Select page: 0, address: 01, and set data: 00. White A Green 2H Fig. 5-1-26. 2H Fig. 5-1-27.