Sony CCD TRV16 Service Manual - Page 89
Initialization Of D, E, F Data - camcorder manual
UPC - 027242551497
View all Sony CCD TRV16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
1-2. INITIALIZATION OF D, E, F PAGE DATA 1. Initializing the D,E,F Page Data Note 1: If "Initializing the D, E, F Page Data" is performed, all data of the D page, E page and F page will be initialized. (It is impossible to initialize a single page.) Note 2: If the D,E,F page data has been initialized, "Modification of D, E, F Page Data" and all adjustments need to be performed again. Adjusting page Adjusting Address Adjusting page Adjusting Address Adjusting page Adjusting Address D 00 to 6F F 00 to FF E 00 to FF Initializing Method: 1) Select page: 0, address: 01, and set data: 01. 2) Select page: 2, address: 00, and set data: 55 3) Select page: 2, address: 01, set data: 55 and press the PAUSE button of the adjusting remote commander. 4) Select page: 2, address: 02, and check that the data is 01. 5) Select page: 3, address: 00, and set data: 29. 6) Select page: 3, address: 01, set data: 29, and press the PAUSE button of the adjusting remote commander. 7) Select page: 0, address: 01, and set data: 00. 8) Perform "Modification of D,E,F Page Data". 2. Modification of D, E, F Page Data If the D, E, F page data has been initialized, change the data of the "Fixed data-2" address shown in the following tables by manual input. Modifying Method: 1) Before changing the data, select page: 0, address: 01, and set data: 01. 2) New data for changing are not shown in the tables because they are different in destination. When changing the data, copy the data built in the same model. Note : If copy the data built in the different model, the camcorder may not operate. 3) When changing the data, press the PAUSE button of the adjusting remote commander each time when setting new data to write the data in the non-volatile memory. 4) Check that the data of adjustment addresses is the initial value. If not, change the data to the inital value. 5) After compleating "Modification of D, E, F Paga Data" select page: 0, address: 01, and set data: 00. Also perform all adjustments.