Sony DCR-DVD108 Operating Instructions - Page 107
On charging the pre-installed, rechargeable battery, Additional Information, Procedures - parts
UPC - 027242701786
View all Sony DCR-DVD108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
6 Attach the eyecup block to the viewfinder, pushing it straight on until it clicks. b Notes • The eyecup block is a precision part. Do not disassemble it further. • Do not touch the lens of the eyecup block. • If you turn the viewfinder lens adjustment lever after removing the eyecup block from your camcorder, the lever and lens may come out the eyecup block. If this happens, replace them as follows: 1 Attach the lever to the eyecup block in the position illustrated. Do not turn the lever before fitting the lens in place. On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to OFF (CHG). The preinstalled rechargeable battery is always charged while your camcorder is connected to the wall outlet via the AC Adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the pre-installed rechargeable battery. However, even if the pre-installed rechargeable battery is not charged, the camcorder operation will not be affected as long as you are not recording the date. x Procedures Connect your camcorder to a wall outlet using the supplied AC Adaptor, and leave it with the POWER switch set to OFF (CHG) for more than 24 hours. 2 Place the lens in the eyecup block so that the three projections fit into the respective grooves. 3 Turn the lever in the direction of the arrow to insert the lens fully into the eyecup block. Additional Information 107