Sony DCR-DVD108 Operating Instructions - Page 22
Step 2: Charging the battery pack, To remove the battery pack
UPC - 027242701786
View all Sony DCR-DVD108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 2: Charging the battery pack POWER switch 2 1 Battery Jack cover DC plug 3 DC IN jack 4 AC Adaptor 4 Power cord To the wall outlet CHG (charge) lamp You can charge the "InfoLITHIUM" battery pack (H series) (p. 103) after attaching it to your camcorder. Notes • You can use only "InfoLITHIUM" battery pack H series. 4 Connect the power cord to the AC Adaptor and the wall outlet. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged. 1 Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting). 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 3 Connect the AC Adaptor to the DC IN jack of your camcorder. Open the jack cover, and connect the DC plug of the AC Adaptor. Match the v mark on the DC plug with the v mark on your camcorder. 5 Disconnect the AC Adaptor from the DC IN jack on your camcorder. Notes • Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug. To remove the battery pack Turn the POWER switch to OFF(CHG). Slide the BATT (battery) release lever and remove the battery pack. 22