Sony DCR-DVD108 Operating Instructions - Page 26
Changing the language setting, To turn off the power, To reset the date and time
UPC - 027242701786
View all Sony DCR-DVD108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Step 3: Turning the power on, and setting the date and time (Continued) 4 Set [Y] (year) with v/V. 11 AM 5 Select [M] with b/B, then set the month with v/V. 6 Set [D] (day), hour and minute in the same way, then touch [NEXT]. 7 Make sure that the clock is correctly set, then touch . The clock starts. You can set any year up to the year 2037. camcorder without any operation attempted for approximately 5 minutes, to save battery power ([A.SHUT OFF], p. 72). z Tips • The date and time does not appear during recording, but they are automatically recorded on the disc, and can be displayed during playback (see page 67 for [DATA CODE]). • Refer to page 99 for information concerning "World time difference." • If the buttons on the touch panel do not work correctly, adjust the LCD screen ([CALIBRATION], p. 105). Changing the language setting You can change the on-screen displays to show messages in a specified language. Touch (HOME) t (SETTINGS)t[CLOCK/ LANG]t[ LANGUAGE SET], then select the desired language. To turn off the power Turn the POWER switch to OFF (CHG). To reset the date and time Select (HOME) t (SETTINGS) t [CLOCK/ LANG] t [CLOCK SET], and set the date and time. b Notes • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable battery and then set the date and time again (p. 107). • It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time. • In the setting at the time of purchase, the power turns off automatically if you leave your 26